Go back to Main Product Search
DETERMINE
MOISTURE DIRECTLY WITH YOUR PH METER.
DETERMINE
MOISTURE DIRECTLY WITH YOUR PH METER.Typical liquid & solid samples: *Freeze Dried Products *Dehydrated Foods *Plastics *Paints/Lacquers *Paper Products *Adhesives *Petroleum Products *Organics *Foods *Drugs *Wood FEATURES *ODORLESS CLOSED SYSTEM. The Titratzon Aquametry System is completely enclosed, eliminating any KF reagent odors. *SOLID OR LIQUID SAMPLES. Comes with both septum injector for liquid samples and fluoropolymer plug for introducing solid samples. *UNIQUE AUTO WASTE EVACUATION SYSTEM. Waste reagent in KF titration vessel is automatically evacuated to 1 gallon waste container using pressurized rubber bulb. *ATTACHES DIRECTLY TO REAGENT BOTTLE. Burette is directly connected to KF reagent bottle via 2-way stopcock thus enabling operator to easily refill buret when required. *WIDE CONCENTRATION RANGE. The probe features high sensitivity with a detection limit of 1 ppm water and an upper limit of 100% water. *SUITABLE FOR FEDERAL AND ASTM METHODS. Probe is suitable for federal specifications and ASTM procedures for water determination using Titretzon technique. *USE WITH YOUR PH METER. Unique KF probe has self contained polarizing circuit and plugs directly into any standard or portable pH millivolt meter. Reads directly off pH or millivolt scales. *FLUOUROPOLYMER/GLASS DESIGN. All tubes and vessels coming in contact with KF reagent are either glass or fluoropolymer SPECIFICATIONS CONCENTRATION RANGE: 1 PPM to 100% water. ELECTRODES: Dual platinum. ACCURACY: +/- 1%. POLARIZATION CURRENT: 10 microamperes. POWER: 1 1/2 volt disposable battery (good for approximately 1 year under normal use). MATERIALS: All tubes and vessels coming in contact with KF reagent are either glass or fluoropolymer ORDERING INFORMATION COMPLETE AQUAMETRY SYSTEM. Includes KF probe; 3-way burette; titration cell and cell top with septum injector and spare silicone septa; fluoropolymer plug for solid samples; fluoropolymer tubing and cap adaptors for attaching system to KF reagent bottle and 1 liter waste bottle; fluoropolymer coated stir bar; Four water vapor absorption cartridges. Cat. No. KFS-186 COMPONENTS TITRATION PROBE. Model KF-186 probe including battery and cable connector REPLACEMENT TITRATION CELL/CELL TOP. Model TC-186 titration cell and cell top with septum injector and fluoropolymer plug for solid samples FILLING/EVACUATION SYSTEM. Model FE-186 System includes filling cap which attaches to KF reagent bottle and assorted fluoropolymer tubing; waste cap which attaches to waste container and special fluoropolymer fitting WATER VAPOR ABSORPTION CARTRIDGES. Used to prevent atmospheric moisture from entering titration cell. Four cartridges. Cat. No. WC-186 BURET. Model B-186 two way buret Return Top of Page Get Additional Information on Product How to Order